4. Control elements
4.1 LBX OVF Force Air Drying Oven
Note: The plug-in is in the back of the device.
4.2 Control panel
▪
The PV screen will display the real temperature of the working room while the SV screen displays the
previously set temperature.
▪
RUN/AT indicator: This indicator lights when the controller is running, when the runtime is over, this indicator is not
lighted.
▪
OUT indicator: This indicator lights if the heater is running; else, this indicator is not lighted.
▪
ALM indicator: When the over-temperature alarm occurs, this indicator lights.
1. PV screen: current measurement value
2. SV screen: set parameter value
3. RUN/AT: work indicator
4. OUT: heat indicator
5. ALM: alarm indicator
6. Set: parameters confirmation
7. "◄" Shift/AT: shift to next digit
8. "▼" Dec/RST: decrease parameter value
9. "▲" Inc: increase parameter value
5