Hotel Mode - AEG CTV 1902 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Block Programme
You can block individual programmes. These programms can only be accessed after entering the password. The program-
me block is valid until unlocked or resetting the TV set with Restore Factory Default.
NOTE:
The function Block Program is only available with the function Lock System activated (On).
1. Highlight the item Block Program and press OK.
2. Press
or
to select the programme to be blocked.
3. Press the green button to block the programme. A lock icon is displayed behind the channel name.
4. Block further programmes or press EXIT to exit the menu. The programmes are blocked.
To unlock access the menu Block Program and mark the channel to be unlocked; press the green button again. The lock
icon disappears.
Parental Guidance
The menu item Parental Guidance is invalid, as DVB-T broadcasters do not transmit the necessary signal.

15.2 Hotel Mode

1. Press SOURCE and enter 3690 with the numeric buttons.
2. The HOTEL MENU is displayed.
3. Perform the settings with the arrow buttons / . To make further adust-
ments, press the TV MENU button.
- Hotel Mode: The settings selected in the menu are only active when you
turn on this option (On).
- Panel Key Lock: Once you have chosen the setting (On), the device can
no longer be operated with the buttons on the device.
- Max Volume: Set the maximum volume for the device.
- Start Source: Here, you select the mode in which the device is supposed
to start after it is turned on.
- Start Channel: If you chose DTV or ATV at the option "Start Source" , you can select the program number here
with which the device is supposed to turn on.
- Setup Menu Display: If you have selected the setting (No), the menu of the device can no longer be displayed
with the TV MENU button.
- Input Source Change: If you have adjusted it to the setting (No), the source menu of the device can no longer be
shown with the SOURCE button.
- Volume default: Here, you select the initial volume when turning on the device.
4. Press EXIT to exit the menu.
ENGLISH
71

Publicité

Table des Matières
loading

Table des Matières