Select Channel; Adjust Volume; Shortcuts; Osd Menu Structure - AEG CTV 1902 Manuel D'utilisation

6.2 Select Channel

• Press the CH +/- buttons or numeric buttons 0-9 to select the desired channel.
• Press the RECALL button on the remote control to return to the previous channel.
• Press CH.LIST to display the channel list. Press the arrow buttons (
display the channel on screen.

6.3 Adjust Volume

• Press the VOL +/-, buttons to adjust the volume.
• Press the MUTE button to temporarily mute the sound. Press MUTE or VOL + to unmute the sound again.

6.4 Shortcuts

AUDIO Select audio language (only if supported by broadcaster)
SOURCE Select external device
PIC
Select picture mode
SOUND
Select sound mode
SLEEP Set sleep timer
ASPECT Select aspect ratio
TEXT
Access Teletext
INFO
Display channel information
SUBTITLE Select subtitle language (only if supported by broadcaster)

6.5 OSD Menu Structure

The OSD (On Screen Display) menu serves to select and set the different functions.
Submenus
• Press the arrow buttons / to select a submenu item. Here you can:
- either perform settings with the arrow buttons / .
- or press OK to open a further setting window and perform settings here with the arrow buttons / .
Return to Main Menu
To select a different item from the main menu first exit the active submenu.
• Repeatedly press TV MENU until the main menu header (e.g. CHANNEL) is highlighted.
Exit Menus
• Press the TV MENU button to exit the menus step by step or press the EXIT button to exit the menu. Your changes are
saved.
NOTE: After a few seconds idling the menu disappears automatically.
) to highlight a channel and press OK to
1. Press the TV MENU button to display the OSD menu.
See main menu items below.
2. First press / to select the desired main menu item.
The submenus are displayed next to them.
3. Press / to select a submenu and press OK to
confirm.
4. Press the TV MENU button to return to the main
menu.
ENGLISH
59