Pvr Recording And Time Shift Function (Only In Dtv Mode) (Optional); Pvr Settings; Direct Pvr Recording (Manual) - AEG CTV 1902 Manuel D'utilisation

9. PVR Recording and Time Shift Function (Only in DTV Mode) (optional)

Important! Before recording the media must be formatted. Existing files are deleted. Check to make sure that no impor-
tant information is saved on the media. Format the media according to "9.1 PVR Settings" ( see page 63).
NOTE:
• PVR recordings are saved in .ts format to the USB device and can only be played back on this TV set. Playback on
computer, DVD player, etc. which do not support .ts format is not possible.
• Important! When you turn off the device during a recording, the recording is stopped and the device will turn off.

9.1 PVR Settings

1. Press the TV MENU button to display the OSD main menu.
2. In the main menu select OPTION, press
• Select Disk
Not applicable for this device.
• Check PVR File System
Check the connected USB device. Press OK to check the PVR file system.
NOTE:
Depending on the USB media's storage capacity, the check can take a little while. Do not press any buttons during
the check.
• USB Disk
Here the file system check status is displayed.
• Format
Press OK to format the disk.
CAUTION Existing files are deleted!
Connected PVR media must be formatted! The device writes specific files to the disk.
The window on the right is displayed. Select between "FAT 32" and "Hi Speed" for-
matting.
• Press / to select the desired formatting mode.
• Press OK to confirm. A security prompt is displayed.
• Press to start formatting. The USB device is now formatted and the PVR files
are created.
NOTE: This can take several minutes according to disk capacity.
If you have selected "Hi Speed" formatting, a window for setting the time shift size appears.
• Press / to select the desired Time Shift Size (size between 512MB....All).
NOTE:
Selecting ALL for the time shift function uses the maximum disk capacity, and for further recordings is no capacity
left.
• Free Record Limit
Press the arrow button

9.2 Direct PVR Recording (Manual)

1. In DTV mode select the programme to be recorded.
2. Press the REC/REP button. The info bar is displayed.
The recording time is displayed at the bottom right. Below this you can see the remaining recording time in blue.
The info bar at the bottom on the left displays the channel number together with the name of the station.
NOTE:
Press REC/REP again to hide the info bar. The REC button remains top left on screen.
3. Press the button to finish recording.
to select PVR File System and press OK.
to select the recording time between 1 and 6 hours.
ENGLISH
63