Canarm GSQ-D Série Mode D'emploi page 5

GSQ-D SERIES
GSQ-D EC SERIES
PROBLEM
Excessive
noise / vibration
High horsepower
Fan does not operate
Motor overload/overheat
Reduced airflow
ITEM # DESCRIPTION
1 Cabinet
2 Access door
3 Bottom door
4 Inlet
5 Wheel
6 Motor mount*
7 Motor*
*:48 T-bolt EC motor is shown, others may differ.
WARRANTY
CANARM Ltd. warrants every new fan to be free of defects in material and workmanship to the extent that, within a period of one
year from the date of purchase. CANARM Ltd. shall either repair or replace at CANARM's option, any unit or part thereof, returned
freight prepaid, and found to be defective.
This warranty does not include any labour or transportation costs incidental to the removal and reinstallation of the unit at the
user's premises.
Components repaired or replaced are warranted through the remainder of the original warranty period only; it is null and void in
case of alteration, accident, abuse, neglect, and operation not in accordance with instructions.
NOTICE: No warranty claims will be honored by CANARM Ltd. unless prior authorization is obtained.
Canarm Ltd. - Corporate Head Office
Tel: (613) 342-5424
M_GSQ_D_06_16_2022
POSSIBLE ISSUE
Wheel rubbing inlet
Wheel unbalance
Object in rotation area or housing
Motor compartment loose
Wrong wheel rotation
Improper duct system
Malfunction of electrical supply
Malfunction of motor
Wrong wheel rotation
Damper Malfunction
Wrong wheel rotation
Improper Duct System
QTY
2
1
2
1
1
1
1
1
5
4
2157 Parkedale Avenue, PO Box 367
Fax: (613) 342-8437
Adjust wheel, loosen set screw(s) and move the wheel, acquiring
clearance between inlet and wheel, then
re-tighten set screw(s)
Check wheels for debris or dirt build up and clean
when necessary
Remove object
Re-tighten the fasteners
Re-wire the motor to change direction of rotation
Re-size ductwork
Check supply voltage, fuse and switch
Check wiring and overload protector
Re-wire the motor to change direction of rotation
Check opening side of back draft damper, check operation status of
controlled damper
Re-wire the motor to change direction of rotation
Check obstruction of duct in the duct or dirty filter
3
Brockville, Ontario Canada
hvacsales@canarm.ca
SOLUTION
6
1
2
K6V 5V6
www.canarm.com
7
Page 5 of 5