Setting The Audio Input - FREIGHTLINER SPRINTER Sound 10 Mode D'emploi

Sound-NAFTA_us.book Seite 46 Donnerstag, 14. August 2003 2:21 14
External audio source
An external audio source can be con-
nected to all car radios except for those
types listed above.
This includes for example a TV or video
unit or a portable CD player. The device
to be connected must have an appropri-
ate audio output.
The audio input of the CD changer con-
nector on the car radio is used for con-
necting an external audio source. This
means that it is not possible to connect
the CD changer and an external audio
source at the same time.
6
For more information about connectors,
please contact your authorized Sprinter
Dealer.
46

Setting the audio input

The audio input setting will vary depend-
ing on which device is connected to it.
Possible settings:
E X T O F F
The audio input is switched off.
E X T A U X E X T T V
or
The audio input is set for operation
with an external audio source.
E X T C D C
The audio input is set for CD changer
mode.
Press the K button repeatedly
E X T
until appears on the display.
E X T
After approx. 1 second, the current
setting (status) of the audio input will
appear. The status display disap-
pears after approx. 4 seconds.
Before the status display disappears,
turn the control knob until the re-
quired setting appears.
Wait until the setting disappears
from the display.
The new setting is stored.