Entering The Code Number; Incorrect Code Number - FREIGHTLINER SPRINTER Sound 10 Mode D'emploi

Sound-NAFTA_us.book Seite 15 Donnerstag, 14. August 2003 2:21 14

Entering the code number

Switch on the car radio by pressing
the rotary control k .
C O D E * * * *
Set the first code digit by turning the
rotary control k , e.g. the number
1
" ".
1 - - - -
Press the a button.
The next code digit is activated.
Set the second code digit by turning
the rotary control k .
Press the a button.
The next code digit is activated.
In this way, enter all five code digits.
1 2 3 4 5
Once you have entered the last digit,
press the a button until you hear
the signal tone.
The entry is confirmed. The car radio
switches to radio mode.
Introduction

Incorrect code number

If an incorrect code number is entered
C O D E
and confirmed, reappears on the
display.
Enter the code again.
i
After entering an incorrect code for
W A I T
the third time, is displayed.
The car radio is disabled for
10 minutes.
The radio must remain switched on
for the disabled period to elapse.
2
15