Specifications - Altocraft J1X-KZ18-255 Manuel De L'utilisateur

SAFETY INSTRUCTIONS FOR COMPOUND MITRE SAW
„ THE MATERIAL SHOULD BE PLACED FIRMLY AGAINST THE FENCE AND
TABLE. The turning of the saw blade should force it down against the table and
rearward against the fence during the cut. Movement of the workpiece during the
cut may cause the blade to climb on top of the workpiece and create a kickback.
When this happens, the cutting head may jump out of your hand or the workpiece
fly loose and cause serious injury.
„ DO NOT START THE SAW WITH THE BLADE IN CONTACT WITH ANY
SURFACE. This may cause the saw to bounce or kick back violently and could
cause injury.
„ IF MAKING A CUT USING ONE HAND TO HOLD THE SAW, ensure the free
hand is clear of the cutting area.

SPECIFICATIONS

„
15 Amp - 120 V - 60 Hz motor
„
No-load speed: 5,000 RPM
„
Bevel cuts from 0° to 45° left
„
Mitre cuts from 0° to 45° left/right
„
10" (255 mm) x 60 tooth carbide-tipped blade, 5/8" (15.9 mm) arbor
„
Positive mitre stops: 0°, 15°, 22.5°, 30° & 45°
„
Cutting capacity:
„
90°cross cut 2-15/16" x 5-5/16" (75 x 135 mm）
„
45°mitre cut 2-15/16"x 3-3/4" (75 x 95 mm)
„
45°bevel cut 1-3/4" x 5-5/16" (45 x 135 mm)
„
45°mitre/bevel cut 1-3/4" x 3-3/4" (45 x 95 mm)
Accessories:
„
Blade wrench
„
2 table extensions
„
Hold-down clamp
„
Dust collection bag
19