Placement Instructions; Removing Your Cover - ROHO AirLITE Mode D'emploi

PLACEMENT INSTRUCTIONS FOR AIRLITE CUSHION:
Back
*
*
Patch is located on the front, right corner of the cushion.
CLEANING/DISINFECTING YOUR CUSHION:
Cleaning and disinfecting are two separate processes. Cleaning must precede
disinfection.
CLEANING THE AIRLITE CUSHION
1. Remove cover.
2. Wipe gently with a cloth dampened with water and a household detergent.
3. Allow foam to air dry thoroughly.
DISINFECTING THE AIRLITE CUSHION
1. Cushion must be cleaned prior to disinfecting to remove any adhered soil.
2. Repeat cleaning instructions above using a household disinfectant instead of
water and detergent.
3. Allow foam to air dry thoroughly.

REMOVING YOUR COVER:

Cover Removal:
1. Unzip cover and remove from cushion.
To cover your cushion, follow these simple instructions:
1. Unzip the cover and make sure the non-skid material is facing down.
2. Insert your cushion into the cover front first, with the contoured foam facing
up. Note: The label on the bottom on the cushion and the directional patch on the
cover indicate proper orientation.
3. Carefully close the zipper.
NOTES
1. DO NOT machine wash or dry the cushion.
2. DO NOT use cleaning products containing petroleum or organic solvents includ-
ing acetone, toluene, MEK, naphtha, dry cleaning fluids, adhesive removers, etc.
3. DO NOT immerse cushion in water.
4. DO NOT autoclave, steam clean, or expose cushion to temperatures in excess of
150˚F (65˚C).
5. DO NOT expose cushion to ultraviolet light or ozone gas cleaning methods.
STEP 1: Place cushion on chair, making sure it
is centered. The directional patch indicates the
front, back, top and bottom of the cushion.
Front
STEP 2: Have the user sit in the chair, making
sure the cushion is centered underneath.
5
UP (Top)
Back Front
Down (Bottom)