Fac F 195 Manuel D'installation page 8

4) SHARPENING THE BLADE (MODELS wITH BUILT IN BLADE SHARPENER)
The blade must be regularly sharpened or as soon as cutting edge is no more sharp, as follows:
1. Carefully clean the blade with denatured alcohol to degrease it after disconnecting the unit from the mains.
2. Loosen knob (11), lift the sharpening device (12) and turn it by 180°. Insert the wheels on the slicer blade. Lock the
knob again (11).
3. Press switch (1) and button (13).
4. Turn the blade for about 30 to 40 seconds, then press switch (1) to stop the blade while checking for any
featheredge by lightly passing the finger against the external part of the blade.
We recommend carrying out this operation very carefully, as this element is very sharp.
In the case a featheredge has formed, press again switch (1) to turn the blade for another 3 or 4 seconds while
pressing buttons (13 and 14) .
Do not SNAG any further as this would warp the blade edge.
5. After sharpening, clean the wheels with a brush dampened with alcohol.
6. Lastly, return the sharpener to its original position.
WARRANTY: 2 YEARS except for the electrical equipment
THIS PRODUCT IS DESIGNED FOR HOUSEHOLD, NON-PROFESSIONAL USE ONLY.
wARNING: MAINTENANCE RULES (PARAGRAPH 2.3)
What declared of the above paragraph refers only to machine versions for sale in countries outside the UE.
The machines to domestic UE standards are instead equipped with unmovable cap nut as prescribed by the said
regulations.
Consequently, the product carrying tray cannot be manually removed.
Guide to the treatment of waste equipment
This product
2002/96/EC.
The crossed
equipment or its packaging indicates that at the end of
its working life the equipment should not be treated as
general household waste but taken to one of the recycling
centres for electrical and electronic equipment run by
local authorities. Alternatively, it may be handed over
to the reseller when purchasing new equipment of
the same type. The user is responsible for consigning
the equipment to appropriate collection facilities at the
end of its working life or face the penalties provided
for by current waste management legislation.
complied with Directive
out wheeled bin symbol on
Separate collection for subsequent delivery of
waste equipment to environmentally-compatible
recycling, treatment and disposal facilities
to prevent possible negative impacts on
the environment and human health whilst
encouraging recycling
components. For further information regarding
the available collection facilities, please contact
your local refuse collection service or the dealer
from whom the purchase was made.
The manufacturer
fulfil their obligations
environmentally-compatible recycling, treatment
and disposal either individually or by joining a
collective scheme.
6/14
of the product's
and/or importer
concerning