Remington PrecisionCut Hair Clipper HC5900 Mode D'emploi page 4

ENGLISH
• Connect the charging adaptor to the product and then to the mains.
• If the product is not going to be used for an extended period of time (2 – 3
months), unplug it from the mains and store.
• Fully recharge your hairclipper when you would like to use it again.
• Allow 4 hours for a complete charge.
• The clipper features a LED fuel gauge to show remaining charge and
charging status, please see the tables below:
4
When connected to the mains and charging
Battery: below 20%
capacity
Battery: 20-40%
capacity
Battery: 40-100%
capacity
Battery:100% capacity
When using cordless
Battery: 40-100%
capacity
Battery: 20-40%
capacity
Battery: below 20%
capacity
Battery: below 5%
capacity
When using cordless and Turbo is activated
Battery: 40-100%
capacity
Battery: 20-40%
capacity
Red LED flash once per
second
Yellow LED flash once
per second
Blue LED flash once per
second
Blue LED will be solid
Blue LED will be
illuminated
Yellow LED will be
illuminated
Red LED will be
illuminated
Red LED will flash once
per half second
Blue LED will illuminate
once every 1.5 seconds
Yellow LED will
illuminate once every
1.5 seconds