Cleaning - TechniSat AUDIOMASTER MR1 Mode D'emploi

10 Cleaning

To prevent the risk of an electric shock, you may not clean the device using a wet cloth or under running
water. Remove the mains plug prior to cleaning!
You may not use scouring pads, scouring powder and solvents such as alcohol, petrol, spirits, thinners,
etc.; they could damage the surface of the device.
Do not use any of the following substances: salt water, insecticides, chlorine or acid-based solvents
(ammonium chloride).
Clean the housing using a soft, moist cloth.
Use the cotton cloth to gently rub the surface until it is completely dry.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
39