Whirlpool MWO 616/01 SL Mode D'emploi page 21

19. MEMORY FUNCTION
(1) Press "
(2) If the procedure has been set, press "
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "
If press "
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting state, press "
b.Press " " once,then press "3","2","0" in order.
c. Press " " once, "PL10" displays, then press "8" and "PL8" displays.
d. Press " " to save the setting. Buzzer sounds once then
If you press "
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting state, press "
screen displays "2", then press "
20. INQUIRING FUNCTION
(1) In cooking state, press "
(2) In the microwave cooking state, press "
level, and the current microwave power will be displayed.
After three seconds, the oven will turn back to the previous state. In multi-stage state,
the inquiring way can be done by the same way as above.
21. COOKING END REMINDING FUNCTION
When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is finished.
22. OTHER SPECIFICATIONS
(1) In standby state , if the set clock digital tube displays current time, the icon " : " would
flash; otherwise, it shows " 0:00 ".
(2) In setting function state, LED displays corresponding setting.
(3) In working or pause state, LED displays surplus cooking time.
" to choose memory 1-3 procedure. The LED will display 1,2,3.
" again, it will start cooking.
" twice, stop pressing until the screen displays "2".
" again, the procedure will be saved as the
" to use it. If not, continue to
" once to save the procedure.
" to run.
", the LED will display clock for three seconds.
" to inquire microwave power
21
LED displays " " 2 .
memory 2 and operated.
" twice,