Environmental Regulations - Ega Master MasterEX 79658 Manuel D'instructions

Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature
fluctuations as well as mechanical damage. Always store the machine in a way that important
machine instructions, e. g. on stickers and signs, are legible.
Dispose of machine and worn out/defective machine tools according the local/national
regulations. Fully disassemble the machine for the necessary disposal. Separate materials
according to local environmental specifications. Dispose of environmentally hazardous greasing,
cooling or cleaning agents in order to avoid environmental contamination.
When working on or with the equipment, it is imperative to observe all legal
requirements in regards to waste-disposal and proper recycling. In particular
during installation, repair and maintenance work, water damaging agents, such
as
• lubricating grease and oil,
• coolant,
• solvent containing cleaning agents
Must not leak into the ground or reach the sewage system!
These materials must be stored, transported, contained and disposed of in
suitable containers!
72
STORAGE
DISPOSAL

ENVIRONMENTAL REGULATIONS