Philips HQ8893 Mode D'emploi page 2

ENGLISH
4
C
C
C
Warning
Please read these instructions before using
the appliance.
Only use the HQ8000 powerplug supplied to
charge the appliance.
The HQ8000 powerplug transforms 100-240
volts to a safe voltage lower than 24 volts.
Only use the powerplug that comes with the
appliance to guarantee safe transformation.
Make sure the HQ8000 powerplug does not
get wet.
The shaver is watertight and can be cleaned
under the tap. Do not rinse with water hotter
than 80cC.
The display
The appliance has a unique 1-minute
demonstration programme. Press the on/off
button a few seconds until all symbols appear on
the display. During the demonstration, the
appliance will automatically be switched on three
times.You can interrupt the demonstration by
pressing the on/off button.
The display provides the following information:
Charging
As soon as you connect the cord, the light in the
display goes on, the plug symbol appears and the
minute indication starts blinking.