Control Pane L Lo Ck - Wolf STEAMER MODULE Guide D'utilisation Et D'entretien

ST EAME R M O D U L E OPE RATI ON
Steamer Operation
CONT R OL PAN E L
The control panel features illuminated touch controls.
A power level indicator for the heating element displays the
heat setting from to . Refer to the illustration below.
Indicators on the control panel will illuminate to indicate
specific module operation. Refer to the chart below.
C O N TR O L PAN EL
Automatic Drain Open
Element On
Control Panel Locked
On /Off
Low
High
Timer Set
Hot Water
Control panel.

CONTROL PANE L LO CK

The control panel lock feature prevents unwanted module
operation. Touch and hold for three seconds to lock and
unlock the control panel. will illuminate when the control
panel is locked.
The control panel will automatically lock after 10 minutes
of inactivity. This automatic lock feature can be disabled
through the extended options menu. Refer to page 6.
When the module is powered up for the first time and after a
power outage, the module will default to lock mode.
PO W E R L E V E L
When the heating element is activated, the power level
indicator will illuminate indicating the level of heat. The
lowest heat is represented by the small flame, varying levels
of heat by additional indicators (dots), and the highest heat
by all indicators including the large flame. Refer to the chart
below.
SET T I N G PO W ER L EVE L U S ES
Low 1–6 indicators Proofing, melting chocolate.
Medium 6–7 indicators Warming foods, use as
chafing dish, defrosting,
steaming bread.
Medium High 7-8 indicators Slow-cooking.
High 8–10 (large flame) Steaming vegetables, rice,
indicators etc.
P OW ER L E V EL I ND ICATOR
IMPORTANT NOTE: Always fill the basin with water prior to
activating the steamer module.
Setting controls:
To activate the steamer module, touch on the control
1
panel. The power level indicator and all indicators will
flash. Refer to the illustration below.
To complete the activation, touch for highest heat,
2
for lowest heat, or touch the desired preset power
level indicator.
To change the heat setting while the unit is on, touch or
3
slide to the desired preset power level or touch + or –
to adjust the temperature in 1° increments.
To turn the unit off, touch .
4
P R EH E AT
Preheat the steamer module until the water temperature
reaches the set temperature before adding food. Always
cook food in an insert pan, never place food directly into the
steamer basin.
POWER LEVEL
INDICATOR
Power level indicator.
wolfappliance.com
|
5