Taski AERO BP Mode D'emploi page 7

Notice:
• The electric diagram of this machine is provided in the spare
parts list.
• Please contact your customer service for further information.
• This manual as well as all user manuals for TASKI machines
are available on the following website:
www.taski.com/instructions-use
Batteries
Permissible batteries
Lithium-ion batteries are required for the use of this machine. Only these batteries
guarantee a long service life.
Attention:
Safety measures to be taken when handling the batteries
• Only insert lithium-ion batteries recommended by
the manufacturer.
• Using other batteries may result in injuries or a fire
hazard.
• Observe the special guidelines for transportation,
storage and use of lithium-ion batteries.
• The operating instructions provided by the battery
manufacturer must also be observed.
• The product-safety-data-sheet provided by the bat-
tery manufacturer must also be observed.
• The supply terminals must not be short-circuited.
• Keep the lithium-ion batteries away from fire and
high temperatures. Danger of explosion.
• The lithium-ion batteries must not be dismantled,
crushed or burned. There is otherwise danger of
fire, explosion and acid burns.
• Damaged lithium-ion batteries (e.g. batteries with
cracks, dropped or broken parts, bent, knocked
and/or extracted contacts) must neither be charged
nor further used.
• Do not use the lithium-ion batteries as an energy
source for other, non-specified users.
• If the lithium-ion battery is too hot to touch, it could
be defective. Place the machine in an incombus-
tible place with sufficient ventilation and far from
combustible materials, where it can cool down
under observation.
Contact TASKI Service Partner after the lithium-ion
battery has cooled down.
• Keep batteries clean and dry.
Attention:
Charging process
• Recharge the lithium-ion batteries only in chargers
given by the manufacturer.
Fire hazard in case of improper use.
• Make sure that the contacts of the lithium-ion
battery and the contacts on the machine are free
from foreign bodies before inserting the lithium-ion
battery.
• Before decommissioning the machine for a longer
period, the batteries must undergo a complete
charging cycle.
Notice:
Safety measures to be taken when handling the batteries
• The maintenance and care of the lithium-ion batteries is limited
to the compliance with the operating instructions of the battery
manufacturer and with the handling described in these instruc-
tions of use.
Service, maintenance and care
⌂ = whenever cleaning is completed, ⌂ ⌂ = every week
Activity
Check/replace dust bag
Check/replace filter cloth
Check/replace exhaust filter
Check/replace HEPA filter
Clean the machine with a moist cloth
Service center
Please always indicate the type and number of the machine whenever you contact
us for order placing or in case of malfunctions. The required data are provided on
the nameplate of your machine. The address of your closest TASKI service partner
is provided on the last page of these instructions of use.
Malfunctions
Malfunction Possible causes
Machine is switched off
No power supply
Main cord defect
Machine without function
Defective ON/OFF switch
Defective battery
Motor does not turn
Machine switches off Self-resetting tempera-
during operation ture sensor triggered
Hose or dust nozzle
blocked (e.g. bits of
wood, bits of fabric)
Dust bag full
Poor suction perfor-
mance
Hose not correctly
installed
Filter cloth soiled
Transport
Notice:
• Accessories must be removed.
• Make sure that the machine is lashed and secured
in the transport vehicle.
• Remove the lithium-ion batteries when storing and
transporting the machine.
5
⌂ ⌂ ⌂
●
●
●
●
●
Troubleshooting
• Switch on the ON/OFF
switch
• Insert the power supply
plug into the mains
socket
• Replace the main cord
• Contact your service
partner
• Contact your service
partner
• Contact your service
partner
• Dust bag full
• Check the admission
accessories
• Remove any foreign
matter
• Replace the dust bag
• Check the hose
• Clean or replace the
filter cloth