Connection Diagram - Alesis MultiMix 4 USB FX Guide D'utilisation

User Guide (English)
Box Contents

MultiMix 4 USB FX

USB Cable

Power Adapter

Software Download Card

User Guide

Safety & Warranty Manual

Connection Diagram

Microphone*
Guitar*
Support
For the latest information about this product (system requirements, compatibility information, etc.) and product
registration, visit alesis.com.
For additional product support, visit alesis.com/support.
Audio Setup
The MultiMix 4 USB FX is a class-
compliant device that can be used
with virtually any digital audio
workstation or recording software
that supports USB audio. If you
want to use the included Cubase
software, follow the directions on
the included software download
card that is included in the
MultiMix 4 USB FX box.
To enable your MultiMix 4 USB FX to send and receive audio to and from your computer, follow the instructions
below for your computer's operating system:
Computer*
Power
Notes:

When recording a guitar or bass with an active pickup, set the MultiMix 4
USB FX's GUITAR SWITCH to the up/raised position. If your instrument
uses a passive pickup, engage the switch.
®

To reduce electrical hum at high gain settings, keep the MultiMix 4 USB
FX's power supply away from your guitar cable and the MultiMix 4 USB
FX's channel inputs.
Monitor Speakers*
2
Headphones*
- +
octave
m1
tap accomp store
m2
pitch
volume x y z
phrase latch
Synth*
* Sold separately
push
a n a l o g m o d e l i n g s y n t h