Garland BG 65 Manuel D'utilisation page 28

27 | English
HOW TO WORK WITH THIS MACHINE
Cutting logs:
1. The long logs such as sunfl owers, corn and tree
branches are introduced by cutting the side tube
(nozzle) to be cut with the blade rotating.
2. Some logs will be pushed into the blades with the
following logs, never use your hands.
3. The last log can be pushed with a stick of wood
ever with their own hands.
4. Do not push the small branches with their hands,
use wooden sticks.
5. When you enter the branches, make sure the
thicker branches are to be pushed more slowly
than thin.
The technique and practice will help you operate
better.
6. Do not overfeed and do not feed wet, soggy
material into the shredder as this may clog the
blade chamber and the discharge chute.
7. Not stand in front of the discharge chute and not
try to open while the machine is operating.
8. Recap the nozzle when fi nished
Crushed twigs and leaves:
1. Leaves, twigs, grass and similar materials must be
placed in the crusher in lots intertwined.
2. Do not open the plastic cover when you add more
material.
3. Do not push the leaves and similar material with
their hands, use wooden sticks.
4. Keep your face and body away from the hopper.
5. Do not overfeed and do not feed wet, soggy
material into the shredder as this may clog the
blade chamber and the discharge chute. Stop the
engine before clean up and use wooden tools,
never your hands and feet.
6. Do not clean the material with the engine running.