Operation; Specifications - Samlexpower SSW-R1-12B Guide D'utilisation

Section 4 |
The remote Control is provided with 3 meter / 10 ft. length of Cat
5, Straight, networking Cable with 8P8C (8 Position, 8 Conductor)
Modular Plugs (rJ-45) on either ends . Plug one end of the cable to
the receptacle on the remote Control (3). Locate the 8P8C (8 Position,
8 Conductor) Modular receptacle (rJ-45) on the inverter and securely
insert the other end of the plug on the remote Control cable. for
switching on and switching off the Inverter using this remote
Control, the Main on / off Switch on the Inverter should be in the
off condition.
CAUTION! If the ON / OFF Switch on the Inverter is left in ON
position, the Inverter cannot be switched off using this Remote
Control. The Remote Control will, however, continue to display the
status of operation.
Please see under "Section 3 - Display" for display information.
SEctIoN 5 |
APPLICABLE MODELS OF INVERTERS
RECEPTACLE FOR CONNECTING CABLE
CONNECTING CABLE TERMINALS
CONNECTING CABLE, LENGTh
DIMENSIONS (WIThOUT CABLE),
DIMENSIONS (WIThOUT CABLE),
WEIGhT (WIThOUT CABLE), KG
WEIGhT (WIThOUT CABLE), LB
NOTE: Specifications are subject to change without notice.
8

oPeRAtion

SPEcIFIcAtIoNS

MODEL NO.
CONNECTING CABLE TyPE
TyPE OF CONNECTION
MM (L
IN (L
SSW-R1-12B
SSW-1000-12A, SSW-1500-12A,
SSW-2000-12A
8P8C (8 Position, 8 Conductor)
Modular receptacle (rJ-45)
8 Conductor,
Cat 5 networking Cable
8P8C (8 Position, 8 Conductor)
Modular Plug (rJ-45)
Straight
3 meters / 10'
GENERAL:
102 x 82 x 35
W h)
x x
4.0 x 3.2 x 1.4
W h)
x x
0.056
0.12