Layout - Samlexpower SSW-R1-12B Guide D'utilisation

Section 2 |
102 mm
92 mm
1. on / off Push button. Used to switch on and switch off the
Inverter.
NOTE: For switching ON and switching OFF the Inverter using
this Remote Control, the Main ON / OFF Switch on the Inverter
should be in the OFF position.
If the Main ON / OFF Switch on the Inverter is left in ON position, the
Inverter cannot be switched OFF using this Remote Control. The Remote
Control will, however, continue to display the status of operation, and
the display will switch OFF when the Remote ON/OFF button is OFF>
2. LCD display
3. (not shown. Located at the back of the remote). 8P8C (8
Position, 8 Conductor) Modular Connector receptacle (also
known as rJ-45 receptacle) used for connecting the remote
Control to the Inverter with the help of 10', Cat 5, 8 conductor
cable.
4

LAYoUt

82 mm
72 mm
Fig. 2.1 Layout
Depth: 35 mm
2
1