Onkyo NCP-302 Mode D'emploi page 23

0 If your Wi-Fi network covers areas near
devices that generate electromagnetic
waves, keep the unit away from these areas.
Firmware update does not complete
∫
successfully
If you updated the unit from an app, if an error
code is displayed on the screen of the app or the
Wi-Fi indicator on the unit lights red, the update
did not complete successfully. Press ON/
STANDBY on the unit to turn the unit off and
then on again, then restart the app. The unit
restarts and the update starts again
automatically about a minute later. Alternatively,
if the update icon is displayed again in the app,
tap the icon to restart the update. The Wi-Fi
indicator on this unit flashes blue during the
update. When the indicator stops flashing and
lights blue, the update is complete, so press ON/
STANDBY to turn the unit off and then on again.
If the update cannot be restarted, check the
network connection.
EN
23