DK2 MMT5X7G Guide D'assemblage page 15

The following pages contain the assembly diagrams and complete parts list
IMpORtANt SAFetY CHeCK LISt
Trailers are generally not used everyday. Your trailer may sit for extended periods of time between uses making it very
important to check all components thoroughly before each use. Following these simple instructions will maximize the
life of your trailer and help you safely transport your cargo.
DO NOT ABUSE THE TRAILER. Trailer performance is best if you follow the guidelines set forth
in this manual. Do not force the trailer to do a job it's not designed for. Know your trailer; learn its
applications and limitations.
1. Make sure the towing vehicle as well as the hitch is capable of towing the trailer. Check your vehicle owner's
manual for trailering ratings.
2. Inspect the trailer and all of its parts before each use.
3. Check the operation of all lights. Operating lights are mandatory on a trailer.
4. Check to ensure Wheel Bolts are tight. Torque to 80 ft.-lbs. Re-tighten after the first 50 miles or 80 kilometers.
5. Check the tire pressure. Maximum 80 PSI (552 KPA) when carrying the maximum rated load.
6. Re-pack the wheel bearings every 2000 miles or 3200 kilometers or a minimum of once every year.
7. Check that the trailer coupler is fastened securely onto the trailer ball. The trailer ball must be a 2" ball.
8. Make sure the safety chain is attached to the trailer and the towing vehicle.
9. If your trailer has an optional side kit, make sure all bolts and pins are in place before transporting your trailer.
10. Do not exceed the Gross Vehicle Weight Rating (G.V.W.R.) which is shown on the trailer serial / certification label.
11. Balance and secure the load on the trailer. See "Trailer Loading" section in this manual.
12. Lubrication of the coupler, springs and the tilt mechanism should be done periodically to stop corrosion and keep
parts moving freely.
DANgeR
y Keep CHILDReN AWAY. Be sure children are kept a safe distance from the trailer operating area.
y NeVeR SIt OR RIDe ON tHe tRAILeR. Serious injury or death could occur.
y eXeRCISe eXtReMe CAUtION WHeN tILtINg tHe tRAILeR. There are many areas of the trailer where injury
can occur if used improperly. The trailer may tilt quickly and unexpectedly during the loading and unloading process.
The tilt option should not be used for heavy loads.
y Ramps should be used for loading heavy items.
y DO NOt drive with the trailer in the tilted position.
y DO NOt load more than one all-terrain vehicle on to this trailer.
y If the trailer is incorrectly attached to the vehicle, it could pull away from the vehicle and fall off.
y Secure trailer to the towing vehicle before transportation. Make sure coupler is locked and the safety chains are
attached to the trailer and the vehicle.
y Secure your cargo into the trailer properly and in compliance to local laws.
y When driving do not exceed the speed limit. Braking time can be considerably longer when a vehicle is towing a
loaded trailer.
y Any modifications made to the trailer or parts of the trailer will void the trailer warranty and release Detail K2 Inc. of
any responsibility for damages, injuries or accidents incurred.
Replacement Lenses
y ONLY USe ORIgINAL eQUIpMeNt pARtS AND ACCeSSORIeS. Consult Detail K2 inc. for the recommended
accessories. The use of improper accessories may cause hazards or injuries.
En.m2
MMT5X7G man
Rear Red Lens (Large) 41237
Rear Red Lens (Small) 41238
Marker Lens (Orange) 41239