Symbols; Dremel Remote Services - Dremel 3D45 Consignes D'utilisation/De Sécurité

DM 2610047405AB 03-18_3D45 3/27/18 9:51 AM Page 5
IMPORTANT: Some of the following symbols may be used on your 3D45. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol
V
A
Hz
ø
0
Dremel remote services provide you with
information and services regarding your Dremel
3D products. The type of information provided
by Dremel remote services may change from
time to time. All product information and
services are provided for your convenience, "As
is" and "As Available".
Dremel does not guarantee that the information
or services will be available, accurate, or
reliable, or that product information or services
will provide safety in your home. You use all

Symbols

Designation / Explanation
Volts (voltage)
Amperes (current)
Hertz (frequency, cycles per second)
Diameter
Off position
Alternating current (type or a characteristic of current)
Hot surface hazard symbol. Contact may cause burn. Allow to cool before
servicing.
Alerts user to read manual.
This symbol designates that this tool is listed by Underwriters Laboratories,
to United States and Canadian Standards.

Dremel Remote Services

product information, services, and products at
your discretion and risk. The product
information and services are not intended as a
substitute for direct means of obtaining
information.
Network connectivity requires an access point
and high speed internet connection. Internet
service provider charges may apply.
Remote printing requires a compatible mobile
device and data plan. Carrier charges may
apply.
5