How To Use Your Kool Patch - IBP KOOL Patch Mode D'emploi

6.3 How to use your KOOL Patch

During your applications, maintain a
minimum distance of 1 m to micro-
wave devices and short-wave devices.
Electromagnetic interaction may impair the
function of the KOOL Patch.
1. Remove the protective foil from the patch.
2. Apply the KOOL Patch to one of the stimu-
lation zones.
Apply the KOOL Patch only to clean, dry,
healthy skin that has not been treated with
cosmetics and creams.
The KOOL Patch must adhere firmly to the
skin. Replace the patch when its adhesive-
ness has subsided.
3. Turn on the KOOL Patch:
Push the ON+ button once.
The illuminated display blinks red.
ON+ button
Illuminated display
OFF– button
4. Adjust the stimulation intensity:
The intensity of the stimulation is in-
creased with the ON+ button and de-
creased with the OFF– button. You may
set the intensity of the stimulation to 10
different levels.
36
● Repeatedly press the ON+ button until you
have reached the highest stimulation inten-
sity that feels comfortable to you.
The brightness of the illuminated display
increases with the amount of stimulation
intensity.
● Repeatedly press the OFF– button if you
would like to lower the stimulation intensity.
The brightness of the illuminated display
decreases with the decreasing stimulation
intensity.
Your KOOL Patch automatically turns off
after 15 minutes. Turn the KOOL Patch
back on if you wish to continue the applica-
tion.
Lower the stimulation intensity or turn
off the KOOL Patch if the effect should
become unpleasant.
5. Turn off the KOOL Patch after an appli-
cation duration of 30 minutes: Press the
OFF– button repeatedly until the illumi-
nated displays turns off.
Remove the electrode patch from the
skin only in off-mode in order to pre-
vent stimulation currents in impermis-
sible areas.
6. Remove the KOOL Patch from the skin:
Slide a finger underneath the patch and
lift up the patch.
7. Moisten the back of the electrode patch
with a drop of water each on the left and
right sides to protect the patch from drying
out.
8. Apply the KOOL Patch on a different
stimulation point.
or
37