Belkin LINKSYS AC1200 Mode D'emploi page 8

Your range extender is now set up. Enjoy your extended Wi-Fi coverage.
Accessing your range extender settings after WPS
Your range extender's default admin password is "admin". It is highly recommended that you change
this after WPS setup.
To change or view range extender settings, first connect to an extended network. In a browser, go to
http://extender.linksys.com and enter your admin password.
Browser-Based Setup
1. Plug in the range extender
Connect the antennas and plug in the range extender midway between your router and the
area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars
(around 50%) of your router's Wi-Fi signal at that location. The setup software will help you
find the right place if you have trouble.
8