Belkin LINKSYS AC1200 Mode D'emploi page 4

Back view
Audio Jack (1)—Connect the extender to your speakers.
Ethernet (2) — Connect wired devices to your wireless network with Ethernet (network) cables. The
green lights turn on when an Ethernet device is connected and active on these ports. The lights blink
when the extender is sending or receiving data over the Ethernet ports.
Wi-Fi Protected Setup™ Button (3)—Use Wi-Fi Protected Setup to automatically and securely add
compatible wireless devices to your network. Refer to Using Wi-Fi Protected Setup on page 17.
Power Port (4)—Plug in the provided power cable.
Power Switch (5)—Only on European versions.
4