Belkin LINKSYS AC1200 Mode D'emploi page 18

2. Connecting with the client device's PIN
a) Enter the PIN from the client device in the field on the extender's Wi-Fi
Protected Setup screen.
b) Click Register on the extender's Wi-Fi Protected Setup screen. When the
connection is complete, the Wi-Fi Protected Setup light on the extender will
be solid for 10 seconds.
c) Click OK on the extender's Wi-Fi Protected Setup screen within two minutes
or you will have to start over.
3. Connecting with the extender's PIN
a)
On the client device, enter the PIN listed on the extender's Wi-Fi Protected
Setup screen. (It is also listed on the product label on the back of the
extender.) When the connection is complete, the Wi-Fi Protected Setup light
on the extender will be solid for 10 seconds.
b)
Click OK on the extender's Wi-Fi Protected Setup screen within two minutes.
18