SET-UP
Step 1
Slide the seat frame (15) over the rowing tube
(12). Fix the stopper (23) on the rowing tube (12)
with each one ϕ10 washer (22) and one 4,2 x 19
cross-head screw (21).
Fix the rear stabilizer (19) with four M8x16
screws (20) on the rowing tube (12).
Step 3
Connect the computer cable connector (52) with
the computer cable (4).
Fix the computer (4) on the main frame (46).
18
Step 2
Fix the seat (14) with four ϕ6 washers (16) and
four M6x15 screws (17) as shown above.
Step 4
Fix the front stabilizer (42) on the underside of
the main frame (46) with two M8x50 carriage
bolts (48), two ϕ8 waved spring washers (43)
and two M8 counter nuts (6).