Installation Of The Rt Model In Tower Position; Installation Of The Rt Model In A Rack - MGE Pulsar 700 Manuel D'installation Et D'utilisation

Pulsar
2.2

Installation of the RT Model in Tower Position

2.3

Installation of the RT Model in a Rack

It is advised to install the battery EXB module(s) at the lowest position in the rack, then install the UPS above.
Follow steps 1 to 4 for module mounting on the rails.
i
The rails and necessary hardware (37) are supplied by MGE Office Protection Systems.
2 — 2 Installation
E N G L I S H
86-86700-00 A01