Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is
ready for use.
1 LED blinks, the power tool is not
ready for use.
4 LEDs blink, the power tool is not
ready for use.
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch. If
the battery display LEDs blink, please observe the instructions given in
the Troubleshooting section.
4
Technical data
4.1 Cordless metal screwdriver
Rated voltage
Weight
Rated speed under no load
Torque
Socket/bit drive
Operating temperature
Storage temperature range (without battery)
4.2 Battery
Battery operating voltage
Ambient temperature for operation
8
English
Printed: 05.06.2019 | Doc-Nr: PUB / 5293039 / 000 / 04
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
The battery has overheated.
The power tool is overloaded or has
overheated.
2153707
*2153707*
21.6 V
DC
6.8 lb
(3.1 kg)
33.3 Hz
(2,000 /min)
9 ftlb
f
(12 Nm)
/
" hex. socket
1
4
with locking ring
1 ℉ ... 140 ℉
(−17 ℃ ...
60 ℃)
−4 ℉ ... 158 ℉
(−20 ℃ ...
70 ℃)
21.6 V
1 ℉ ... 140 ℉
(−17 ℃ ...
60 ℃)
Publicité
Table des Matières
