nVent RAYCHEM NGC-CMA Manuel D'installation page 4

3 Power On
Press the power button to turn the unit on.
4 Set up the device
When the Windows Mobile screen displays on the screen
tap anywhere on the screen and follow the on-screen
instructions until setup is complete.
5 Insert the Companion CD into the computer
Insert the Companion CD into the computer's CD Rom drive.
Click "Start Here". Follow the on-screen instructions.
The setup wizard installs following:
– Active Sync 4.x or higher
– Microsoft Outlook (if necessary)
– Other optional software applications
6 Connect the RAYCHEM NGC-CMA to your computer when
instructed by setup wizard on the computer
Connect the USB connection cable to a free USB port on
your computer, insert the device into the docking station or
connect the USB cable to USB connection set.
7 Establish a partnership
Follow the on-screen Active Sync instructions to establish a
connection between your Pocket PC and your computer or
select guest partnership.
USE OF HP ORIGINAL DOCUMENTS
The nVent RAYCHEM NGC-CMA is based on the HP iPAQ
hx2000 Pocket PC family. Therefore all related HP documents
or Software updates can be used further on. All modifications
regarding the hardware are descripted within these booklet as
good as possible. The use of standard software is equal to the
original HP devices.
nVent.com | 4