ONOFF PIJA Guide De Montage Et D'utilisation page 13

1 The dropper post uses internal cable routing end is designed to be com-
patible with bicycle frames that provide for such cable routing.
DO NOT DRILL OR MODIFY YOUR FRAME IN ANY WAY
Doing so will void the Warranty. Modifi cation of your frame in any
way may result in frame failure which could result in injury or death.
Run cable through the hole in your frame.
2
Fix the cable stopper to the pull rod, as shown above.
3
Pull the rod and insert the cable through the gap, fi x the cable housing
4
at the bottom recess part.
Insert the post to the seat tube and adjust the appropriate height, tighten
5
with the frame/seat collar recommended torque.
EN
13