ohmex MIST FAN 4040 WTR Manuel D'utilisation page 69

FAN 4040 WTR
PREPARING THE APPLIANCE
Exhausted batteries must be disposed in
the appropriate containers prepared for the
collection.
Do not throw batteries in household waste and
do not disperse them in the environment. Do
not dispose batteries in an incinerator, as they
could explode.
• Connect the power plug to the power
socket making sure that the mains power
corresponds to the one indicated on the
appliance data label.
• Press the OFF key to switch the appliance off
and put it in stand-by mode.
• Start the appliance by pressing the ON/SPEED key on the appliance or on the remote
control.
• Select the fan speed by pressing the ON/SPEED key on the appliance or on the remote
control.
At each press, the corresponding led appears:
LOW (minimum) > MED (medium) > HIGH (maximum).
• Select the functioning time by pressing the TIMER key on the appliance or on the
remote control.
At each press, the corresponding led appears:
0,5h > 1h > 2h > 4h > OFF > ......
• Select the type of air by pressing the MODE key on the appliance.
At each press, the corresponding led appears:
NOR (normal) > NAT (natural) > SLEEP (silent/night).
• Select the oscillation function by pressing the OSC key on the appliance or on the
remote.
Press the key once and the OSC, led will light up, press it again and the led will turn off
(function disabled).
USE
EN
65