Philips QP2630 Mode D'emploi page 25

Problem
The appliance
doesn't cut hairs
anymore.
The appliance
makes a strange
noise.
The appliance
doesn't function
optimally
anymore.
Possible cause
The blade is
blocked by dirt.
The blade is placed
on the handle
incorrectly.
The blade is
damaged or worn.
The blade is
damaged or worn.
The blade is placed
onto the handle
incorrectly.
The blade is
blocked by dirt.
The blade is
blocked by dirt.
The blade is
subject to wear
and therefore its
performance
decreases over
time.
English
Solution
Switch on the appliance
and rinse the blade under
the tap with warm water.
Hold the blade in a cup
with warm water (60°C and
no hotter) for approx.30
seconds.
Push the blade onto the
appliance until you hear a
click.
Replace the blade with a
new one. See chapter
'Replacement'.
Replace the blade with a
new one. See chapter
'Replacement'.
Remove and reattach the
blade. Push it onto the
appliance until you hear a
click.
Remove the blade and
clean it thoroughly.
Remove the blade and
clean it thoroughly.
Replace the blade with a
new one. See chapter
'Replacement'.
25