Philips QP2630 Mode D'emploi page 10

10
English
General
Charging
Battery status indicator QP2630:
- This appliance is waterproof. It is suitable for
use in the bath or shower and for cleaning
under the tap. For safety reasons, the appliance
can therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Charge the appliance before first use and when
the display indicates that the battery is almost
empty.
QP2630: Charging takes approx. 4 hours.
QP2620: Charging takes approx. 8 hours.
A fully charged appliance has an operating time of
up to 60 minutes (QP2630) or 45 minutes
(QP2620).
Note: This appliance can only be used without
cord.
When the battery status indicator flashes orange,
the battery is almost empty.
When the appliance is charging, the battery status
indicator light flashes green.