Recommended Light Intensities (1-5); Tanning Advice - Philips SC2001/01 Mode D'emploi

Masquer les pouces Voir aussi pour SC2001/01:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 75
EngliSh
14
Skin colour &
characteristics:
hair colour: dark
blond/light brown/
brown/dark brown/
black
hair colour: white/
grey/red/light blond
4203.000.6357.3.indd 14
intensity. Therefore you should lower the light intensity if you
experience any discomfort anywhere.
The light intensity you use can feel warm or hot on the skin, but should
never feel uncomfortable. To prevent skin reactions, see chapter 'Using
the appliance', section 'Possible side effects and skin reactions'.

recommended light intensities (1-5)

In the table below, 'x'means that the appliance is not suitable for you.
White
Beige
Light
(always
(easy
brown
sunburn,
sunburn,
(sometimes
no
minimal
sunburn,
tanning)
tanning)
good
tanning)
4/5
4/5
3/4/5
x
x
x
important:
-
To check whether Philips Lumea is suitable for you, see section 'For
whom is Philips Lumea not suitable?'.
-
At higher light intensities:
-
the method is more effective.
-
you have a higher risk of skin reactions. See chapter 'Using the
appliance', section 'Side effects and skin reactions'.
-
the pain sensation can be stronger.
-
If your skin has been exposed to natural sunlight or an artificial tanning
method, your skin may be darker than during the previous treatment.
Perform a skin test (see chapter 'Using the appliance', section 'First use')
on the area to be treated to determine if you have to use a lower light
intensity than usual. For more information, see section 'Tanning advice'
below.

tanning advice

Sun exposure before treatment
-
Wait at least 48 hours after sunbathing before you use the appliance.
Sunbathing can cause skin to darken (tan) and/or can cause sunburn
(reddening of the skin).
-
After these 48 hours, check the skin for any remaining sunburn. Do not
use Philips Lumea as long as sunburn persists.
-
When the sunburn has disappeared, perform a skin test (see chapter
'Using the appliance', section 'First use') on the area to be treated to
determine the appropriate light intensity.
-
If your skin is tanned, you run a very high risk of developing skin
reactions after treatment with Philips Lumea. Perform a skin test (see
chapter 'Using the appliance', section 'First use') on the area to be
treated to determine the appropriate light intensity.
Sun exposure after treatment
Mid brown
Dark
(rarely
brown
sunburn,
(rarely
fast and
sunburn,
good
very good
tanning)
tanning)
3/4
1/2/3
x
x
Black
(rarely
to never
sunburn,
very dark
tanning)
x
x
27-04-10 15:00

Publicité

Table des Matières
loading

Table des Matières