Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Settings
✎
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
K
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 20:
1.
In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
2.
Scroll through the list, select the desired network
or Add Network, and then press the
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4.
Enter your wireless network or wireless router's
name.
• Enter letters by selecting a letter with the
,.
buttons, and then pressing the
button.
• To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select
, and then press the
• To display symbols and punctuation, select
123#&, and then press the
redisplay letters, select 123#&, and then press
the
OK
button.
When finished, select Done, and then press the
OK
button.
5.
On the Security type screen that appears,
use the ,. buttons to select the network's
Security type, and then press the
On the next screen, enter your network's
security code or pass phrase.
• Enter letters by selecting a letter with the
,.
buttons, and then pressing the
button.
When finished, select Done, and then press
the
OK
button. The product searches for the
network.
6.
The Network connection fail screen appears.
Use
buttons to select IP Settings, and
then press the
OK
button.
7.
Select the IP Setting field, and then set it to
Enter manually.
8.
9.
10. Repeat Steps 8 and 9 until you have filled in all
OK
button.
✎
11. When finished, select OK, and then press the
12. On the Security screen, enter your network's
OK
OK
button.
13. When finished, select Done at the right of the
OK
button. To
14. After the home theater verifies the network,
✎
K
OK
button.
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC) function.
If your wireless router has a WPS(PBC) button, follow
OK
these steps:
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 20:
1.
22
- English
Select a network parameter to enter (IP
Address, for example), and then press
button. Use the ,. buttons on the remote
control to enter the numbers for the parameter.
Or use the Num keypad to enter a parameter
number. Press and hold the 123 button until the
Num pad appears on the screen. When the Num
pad appears, select a number using the ,.
button and then press the
buttons on the remote control to move from
entry field to entry field within a parameter. When
done with one value, press the
Press the , or . button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
parameters.
You can get the Network parameter values from
your Internet provider.
OK
button. The Security screen appears.
security code or pass phrase. Enter letters by
selecting a letter with the ,.
then pressing the
OK
button.
screen, and then press the
product verifies the network connection and
then connects to the network.
select OK, and then press the
You can also begin the Manual Network setup by
going to Settings > Network > Network Status.
WPS(PBC)
In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
OK
OK
button. Use the
OK
button.
buttons, and
OK
button. The
OK
button.
Publicité
Chapitres
Table des Matières
