Samsung HT-H6500WM Manuel D'utilisation page 16

Settings
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto
lets the product adjust its HDMI output to 24
frames per second automatically for improved
picture quality if attached to a 24Fs compatible TV.
• You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
• Movie Frame is only available when the product
is in the HDMI 1080p output resolution modes.
DVD 24Fs Conversion
Converts DVD playback to 24 frames per second
and outputs it via HDMI. This option is only
available when Movie Frame (24Fs) is set to on.
Fit Screen Size
Lets you select the optimal size for the Smart Hub
or Screen Mirroring screen.
HDMI Color Format
Lets you set the color space format for the HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
HDMI Deep Color
Lets you set the product to output video from
the HDMI OUT jack with Deep Color. Deep Color
provides more accurate color reproduction with
greater color depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Sound
Simple Speaker Setup
Lets you configure the settings of the speakers you
have connected to obtain the best possible surround
sound.
Normal Mode: Select if you have set up your
speakers in the recommended speaker layout
with the surround speakers next to or behind the
listening positions.
Simple Mode: Select if you have put your
surround speakers in front of the listening position.
Downmixes the front sound to the surround sound
speakers.
✎
SFE, Virtual 7.1 will not operate when the
simple mode is on.
Speaker Settings
Sound Output : Lets you select which speakers
are active, either the TV's speakers or the home
theater's speakers.
Settings (Home Theater Speakers) : Lets you
adjust the following speaker settings and turn the
test tone on and off so you can test the speakers.
- Volume Level : Lets you adjust the relative
loudness of each speaker from 6dB to -6dB. For
example, if you like deep bass, you can increase
the loudness of the subwoofer by 6dB.
- Distance : Lets you adjust the relative
distance of each speaker from the listening
position up to 30 feet. The farther the
distance, the louder the speaker will be.
- Speaker Test : Begins a test to set the best
surround sound configuration. Press Stop
Test to stop the test while it is in progress.
Settings (Multiroom Link) : You can enjoy
sound through a remote speaker that is
connected to the home theater through your
home network. To use the network speaker,
select Multiroom. If there is a network speaker
available, it will appear on the screen. Move to
the desired network speaker and select it. When
a popup dialog is displayed, you can edit the
network speaker's name or set whether to use it
or not.
- Don't Use : The network speaker is not used.
- Multiroom : The network speaker outputs
audio. All network speakers output the same
audio regardless of channel using the PCM
format only.
✎
SOUND EFFECT and 3D SOUND are not
applied if Multiroom is set to on.
✎
The network speaker is not available when
Screen Mirroring is active.
Sound Customizer
Sound Customizer lets you calibrate the home
theater for the optimal sound quality based on your
hearing level and the ambient conditions.
To create a Custom Sound Profile, follow these
steps:
1. In the Sound Customizer Menu, select Add
Custom Sound.
2. On the next screen, select Start. The Preview
screen appears.
3. Select Preview to preview the Test Sound.
Select Next, and then press
16
- English
OK to continue.