Troubleshooting; Too Low Or Unstable Pressure; No Foam Creation/Unsatisfactory Foam Quality - Ecolab Eco-Satellite SE11 Série Mode D'emploi

2.6. Troubleshooting

2.6.1 Too low or unstable presssure
Check Booster / Main Station
2.6.2 No foam creation / unsatisfactory foam quality
Is the change over
handle in foam
position?
Is the foam nozzle
connected?
Is the air supply
conected?
Is the air supply
adjusted
Is the filter in hose from the
container with detergant
clogged?
Is there detergent in the
container?
Call a service
technician
NO
Yes
NO
Yes
NO
Yes
NO
Yes
Yes
No
No
Yes
Set the change
over handle to
foam position.
Connect a 50/200
foam nozzle
Open the closing
valve for air
Adjust the air
supply using the
adjustment valve
Clean or replace
the filter
Add detergent to
the container
9