Error Messages; Error Code; Replacement Parts And Accessories - Adam CPWplus Série Mode D'emploi

EN

14.0 ERROR MESSAGES

During the initial power-on testing or during the operation the scale may
show an error message. The error messages are described below.

ERROR CODE

If an error message is shown, repeat the procedure that caused the
message such as turning the scale on, calibration or any other functions. If
the error message is still shown, contact your supplier for further support.

15.0 REPLACEMENT PARTS AND ACCESSORIES

If you need to order any accessories and spare parts, contact your
dealer or Adam Equipment. A partial list of such items is as follows-
Accessories
Hard carry case (For Standard CPWplus
models only)
Printer
RS-232 cable
Non-slip mats (For CPWplus L models only)
Spare Parts
Power Supply Adapter
Keypad overlay
Stainless Steel Pan for CPWplus
Stainless Steel Pan for CPWplus M, W
Stainless Steel Pan for CPWplus L
Replacement Lead-Acid Battery for
CPWplus M, CPWplus W & CPWplus L
© Adam Equipment Company 2014
DESCRIPTION
A continuous beep is
heard.
If the selected mass is
less than 10% or more
than 20% of the capacity
of the scale, an error
CALEr
message " " will be
displayed and the scale
will return to zero.
24
POSSIBLE CAUSES
Weight on the pan exceeds the
capacity of the scale. Remove
the weight from the pan.
Incorrect calibration
Repeat the process correctly.
Part Number
7954
8023
9014
9013
Part Number
7973
7960
7972
9011
9010
9012
9009RevD1-Jul14
mass.