Setting Of Hold Time Limit - Adam CPWplus Série Mode D'emploi

EN
•
If "Hod 1" is selected, pressing the [Unit] key will take you
back to the first parameter on Auto Power Off.
•
If you want to return to weighing, press the [Print/Hold] key.
13.1.9

SETTING OF HOLD TIME LIMIT

•
This parameter is to set the time limit by which the display is
held after the hold function is used. It is applicable if the
hold function is set to "Hod 2" or "Hod 3".
•
Use the [Tare/Zero] key to scroll through the options.
•
The options are-
•
Press the [Unit] key to confirm the selection and move back
to the first parameter or press [Print/Hold] to exit the
parameter setting.
© Adam Equipment Company 2014
Holds the display for
an infinite time limit
Holds the display for
15 (1 x 15) seconds
Holds the display for
30 (2 x 15) seconds
Holds the display for
45 (3 x 15) seconds
Holds the display for
60 (4 x 15) seconds
20 9009RevD1-Jul14