Adam CPWplus Série Mode D'emploi page 15

EN
Input commands format:
Z <cr> <lf>
H <cr> <lf>
N <cr> <lf>
G <cr> <lf>
T <cr> <lf>
Output format:
G
+ 2.00 kg
<cr><lf>
N
+ 1.00 kg
<cr><lf>
© Adam Equipment Company 2014
Tares the scale to display the net weight- same as
pressing [Tare/Zero]
Sets the scale to hold if the hold function is enabled.
Same as pressing the [Hold] key
Sends the net weight to the RS-232 interface.
Sends the gross weight to the RS-232 interface.
Sends the tare weight to the RS-232 interface.
13 9009RevD1-Jul14