Table des Matières
Publicité
UltraPro UB3 Cart:
1. Prior to maneuvering the cart, position the cart arm (such as a monitor arm or amplifier arm) over the cart
surface.
2. Slide the keyboard tray into the cart.
3. Only move the cart using the cart handle.
4. When stationary or unattended, lock all the wheel castors on the cart.
Cart Grounding Option:
Note: Additional grounding is required for safe operation of the UltraPro UB3 Cart system when it is used with a
laptop without an isolation power supply. Install the grounding strap as part of the cart installation procedure, prior
to conducting patient studies. The grounding strap must connect the UltraPro base unit and the cart.
1. Install the UltraPro Base Unit on
the top or the first shelf of the cart.
2. With a Philips head screwdriver
(not provided), attach one end of
the grounding strap to the screw
hole on the rear of the UltraPro
base unit and the other end to the
rear of the cart, using the two
screws with captive washers
provided in the kit.
3. Affix the ground label to the cart
next to the grounding strap
connection.
Cleaning Instructions:
1. Clean the article with a commercial wipe such as CaviWipes
2. Wipe the article using a lint-free cloth and air dry.
Understanding Warning and Caution Statements:
WARNING
Refers to a hazardous situation that could result in death or serious injury if not avoided.
•
Information on how the hazardous situation is avoided.
CAUTION
Refers to a hazardous situation that could result in minor or moderate injury or material damage
if not avoided.
Information on how the hazardous situation is avoided.
•
Warnings and Precautions:
WARNING
Configurations using a laptop without an isolation power supply may pose an electrical shock
hazard.
Ensure that the grounding strap is securely fastened between the base unit and the cart.
•
1
Large Connector
2
Small Connector
or Sani-Cloth
TM
Page 3 of 110
to remove visible soil.
®
Publicité
Table des Matières
