Safety Instructions - Wolfcraft 5121000 Notice De Montage

• The sawbuck is only deemed to be used in accordance with the intended use if wood is worked using a chainsaw in accordance with
DIN EN ISO 11681 or DIN EN 60745 respectively or a hand saw.
• Only use the sawbuck on a level, solid and a horizontal surface in order to ensure a safe foothold. There is otherwise a risk of it tilting.
• The safety instructions issued by the manufacturer should be adhered to. A non-adherence to the instructions can harm the user or others.
• Only machinery that meet current regulations are to be used.
• Always disconnect the electric chainsaws from the mains under the following circumstances:
- before carrying out maintenance work and
- when not in use
• Check the functional capability and correct assembling (e.g. screwed connections) of the sawbuck, machinery and tools each time
before commencing work.
• Never work with damaged or blunt tools.
• Ensure that the wooden panels of the sawbuck are correctly secured in the tubes.
• Secure the wood with the ejection guard before starting to saw anything. You should not work under any circumstances without securing
the ejection guard first!
• Ensure that your machine has a secure foothold.
• Only use the machines for their intended purpose.
• Do not make any technical alterations to the sawbuck.
• Never remove existing protective devices.
• Ensure that your clothing is close to your body and not hanging loosely (especially sleeves, etc.) to avoid accidents.
• Always wear your personal protection equipment (approved helmet, goggles, ear protection, (forestry) gloves, clothing and shoes).
• Never reach into the machines when in use.
• Keep children away from the work area and store your machines and tools in a secure place, out of the reach of children.
• Never allow inexperienced people to work with your machines and tools without instruction or supervision.
• When sawing, always keep sufficient distance between the chainsaw guide bar and the steel elements of the sawbuck.
• Always work in a methodical and concentrated manner.
• The two wooden panels serve to stabilise the sawbuck and prevent the chainsaw from coming into contact with the ground.
If the sawbuck becomes unstable to work with, due to the wooden panels being damaged by incisions, etc., they are to be replaced
with original wolfcraft spare parts.
®
• Only use original wolfcraft
®
• wolfcraft ® recommends that you treat the boards with a suitable wood sealant to protect the woods on an annual basis.
• Fold the sawbuck and store it in a place where it is protected from the rain, moisture and UV radiation.
5 years Guarantee
wolfcraft Guarantee
®
Dear consumer!
You have purchased a high-quality wolfcraft
standards, and undergo intensive development and test phases before leaving the factory. Constant controls and regular tests during
their manufacture, ensure a high quality standard. Sound technical developments, and reliable quality controls warrant for the right choice
of appliance. This wolfcraft ®
5 years Guarantee
Should your appliance fail within the guarantee period owing to a material fault, it will be replaced by wolfcraft
The guarantee period begins from the date of purchase, which must be certified on the guarantee card by the dealer's stamp and signature.
Retain the receipt. The validity of this guarantee is subject to the use of the appliance solely for domestic purposes, proper handling
and the use of original wolfcraft

Safety instructions

spare parts as the warranty is otherwise invalid.
® appliance, which we know you will enjoy using. wolfcraft
appliance is guaranteed for a period of five years.
® spare parts. Claims under guarantee are only valid with a fully completed guarantee card.
t
12
® appliances are built to high technical
® free of charge.