Care And Cleaning - Toastess TDF-22 Mode D'emploi

Booklet TDF-20 5/18/04

CARE AND CLEANING

1. Unplug cord from wall outlet. Allow oil to cool. NOTE: Oil retains its
temperature for a long time after use. Do not attempt to empty the fryer
until the oil has cooled sufficiently. Do not move or carry the Fryer while
it is still hot.
2. Once oil is cooled, pour the oil into a container that holds at least 3 litres.
Pour the oil from the Base in the section between the Handle and the
front raised section (which includes the guide). Place the container in the
sink and pour the oil quickly with the fryer tilted at least 90°. Make sure
that the fryer is completely empty before turning the Fryer upright to
prevent oil from dripping down the exterior wall of the fryer.
3. When Base is empty, add about 2 cups (500 ml) of warm soapy water
and let stand for a few minutes. Use a nylon pad or brush to remove
heavy oil stains. Empty. Rinse with about 2 cups (500 ml) of clean water.
Empty and dry. NOTE: Be careful not to let water drip down exterior wall
of Fryer.
4. Filter oil through either absorbent paper or a large coffee filter into
another container or back into the cleaned Fryer. Oil should retain its
properties for another 12 uses.
5. Wipe Cover and exterior wall with a damp cloth and dry.
6. The Frying Basket and Handle can be washed in hot soapy water.
Rinse and dry.
7. Put the Frying Basket back into the Fryer, replace the cover and store in
a cool dry place.
NOTE:
• DO NOT IMMERSE COVER, FRYER, ITS CORD OR PLUG IN WATER OR ANY
OTHER LIQUID.
• DO NOT USE STEEL WOOL OR ABRASIVE CLEANERS ON ANY PART OF
YOUR APPLIANCE.
9:39 AM Page 18
7