Troubleshooting Guide - LEXIBOOK BTP100 Série Mode D'emploi

HANDS-FREE MODE
Enjoy receiving hands-free calls when your mobile phone is paired with the
speaker.
1. When you have an incoming call the Bluetooth® speaker will start ringing. Press
the button
conversation will be amplified through the unit speakers.
2. You can adjust the volume by pressing volume up and down buttons. Speak in
the speaker via the built-in microphone (21).
3. Press
been terminated.
SYMPTOM
The Bluetooth®
device and speaker
are not pairing
Pairing lost
Sound distortion
No sound
BTP100series_IM1246_V10_303.indd 17
to answer the phone, a signal tone will sound and the
to end the call, a signal tone will sound to indicate the call has

TROUBLESHOOTING GUIDE

SOLUTION
Ensure the Bluetooth® speaker is connected to power
or charged and power switch is on.
Ensure the Bluetooth® function on both audio player
and speaker are activated.
Ensure that the Bluetooth® feature on the device has
not been deactivated. It may be necessary to repeat
the pairing steps again.
Ensure the device is within 10 meters (32 feet) of the
Bluetooth® speaker.
Ensure there are no obstacles.
Make sure the sound volume is not too high. Press the
volume down button to reduce the volume.
Ensure the volume is not too low.
Ensure the song is playing.
Ensure the Bluetooth® device is correctly paired.
17
14/6/16 6:22 pm