Charging The Device - LEXIBOOK BT010 Série Mode D'emploi

e included:
udio cable
tic sheets,
d be
utton
h
FF
witch (10)
off
BT010seriesIM1514_19Dec_V04.indb 15
WARNING: Significant electromagnetic interference or electrostatic
discharges may cause the device to malfunction or lose data. If the
device is not functioning correctly, switch it off and then on again,
or unplug the USB cable.

CHARGING THE DEVICE

1. Make sure the speaker is off.
2. Connect the micro USB side of the cable (included) to the
speaker and the cable's USB end to a computer.
3. When the speaker is charging, the LED (4) lights up in red.
4. When the speaker is fully charged, the LED (4) turns off.
Disconnect the cable.
Warning:
- Risk of explosion if battery is incorrectly replaced. Please only
replace it with an identical or a similar battery.
- The battery should not be exposed to high temperatures, such as
sunlight, fire or anything similar.
1. Activate the Bluetooth ® function on your personal device
(smartphone, MP3 player, etc.). Please refer to your device's
instruction manual on how to activate this function.
2. Turn the speaker on to activate auto-detection of a nearby
device.
3. Confirm pairing or select the Bluetooth ® name to connect your
player to the speaker.
PAIRING
15
20/12/2014 10:31 AM