Connecting To A Computer - LEXIBOOK BT010 Série Mode D'emploi

BT010seriesIM1514_19Dec_V04.indb 18
• The LED (9) blinks once in blue every three seconds when
connection is lost.
• The LED (4) lights up red when speaker is charging.
• The LED (4) blinks thrice in red every 15 seconds when battery
is low.
Speaker (without Bluetooth ® )
Connecting to an audio player
1. Connect the 3.5mm audio cable to the speaker's audio in jack
(2) and the other end of the cable to your personal device.
2. Turn the speaker on. The LED (9) lights up blue.
3. Click on your device's play button to make the sounds come out
of the speaker and listen to your desired audio file.
4. You can also listen to audio files from Internet. Open your
internet browser and select an online player.
5. To turn the speaker off, slide the power button (10) to the right.
The LED (9) light turns off.
6. Unplug the cable from the speaker and the player.

Connecting to a computer

1. Connect the 3.5mm audio cable to the speaker's audio in jack
(2) and the other end of the cable to your computer.
2. Turn the speaker on. The LED (9) lights up blue.
18
3. Open an a
play button t
to your desir
4. You can a
internet brow
5. To turn the
The LED (9)
6. Unplug th
Problem
The unit doe
(indicator no
No sound
20/12/2014 10:31 AM