LEXIBOOK Meteoclock Active Clock Revolution Mode D'emploi page 20

4. Use the or
in 0.1 increments. Press and hold the keys to auto-scan to the next or the previous
radio station.
5. Once the desired station is assigned to the selected preset number, press the SET
key to confirm and save the change.
6. Repeat the above process from step 2 until all the preset numbers are assigned to a
radio station.
7. When you have finished, press the SET key to save your settings and go back to
radio mode.
Radio stations preset automatic setting
1. In radio mode, press and hold the SET key until the frequency's digits start flashing.
2. Press and hold the SET key once again to start the automatic setting of the stations
preset.
. The unit automatically assigns a frequency of a received radio station to a preset
number.
4. When the automatic setting is completed, the unit will automatically broadcast the
first preset radio station ("FM01").
Listening to the radio
1. In clock mode, press the RADIO key to switch on the radio.
2. Press the
. Press and hold the
Sleep mode
1. When the radio is turned on, press the SET key to enter the "sleep" function setting
mode.
2. Press the
switched itself off. You can choose from "00MIN" to "90MIN" (minutes).
Note: if you select "00MIN", the "sleep" function will be disabled.
. Press the SET key to save your settings and switch on the "sleep" function. The
"sleep" icon
4. The radio will operate during the selected time delay, and then it will automatically
switch off.
20
keys to scan the radio frequencies up or down. Press once to scan
or keys to toggle between the 20 preset radio stations.
or keys to scan the radio frequencies up or down.
or keys to select the time delay before the radio automatically
and the selected time delay will be displayed on the LCD screen.